SIR model for the spread of COVID-19

This example illustrates how to use GraphSpace and how to model agents on an graph (network) where the transition probabilities between each node (position) is not constant.

SIR model

A SIR model tracks the ratio of Susceptible, Infected, and Recovered individuals within a population. Here we add one more category of individuals: those who are infected, but do not know it. Transmission rate for infected and diagnosed individuals is lower than infected and undetected. We also allow a fraction of recovered individuals to catch the disease again, meaning that recovering the disease does not bring full immunity.

Model parameters

Here are the model parameters, some of which have default values.

• Ns: a vector of population sizes per city. The amount of cities is just C=length(Ns).
• β_und: a vector for transmission probabilities β of the infected but undetected per city. Transmission probability is how many susceptible are infected per day by an infected individual. If social distancing is practiced, this number decreases.
• β_det: an array for transmission probabilities β of the infected and detected per city. If hospitals are full, this number increases.
• infection_period = 30: how many days before a person dies or recovers.
• detection_time = 14: how many days before an infected person is detected.
• death_rate = 0.02: the probability that the individual will die after the infection_period.
• reinfection_probability = 0.05: The probability that a recovered person can get infected again.
• migration_rates: A matrix of migration probability per individual per day from one city to another.
• Is = [zeros(C-1)..., 1]: An array for initial number of infected but undetected people per city. This starts as only one infected individual in the last city.

Notice that Ns, β, Is all need to have the same length, as they are numbers for each city. We've tried to add values to the infection parameters similar to the ones you would hear on the news about COVID-19.

The good thing with Agent based models is that you could easily extend the model we implement here to also include age as an additional property of each agent. This makes ABMs flexible and suitable for research of virus spreading.

Making the model in Agents.jl

We start by defining the PoorSoul agent type and the ABM

using Agents, Random
using Agents.DataFrames, Agents.Graphs
using StatsBase: sample, Weights
using DrWatson: @dict
using CairoMakie

@agent struct PoorSoul(GraphAgent)
    days_infected::Int  # number of days since is infected
    status::Symbol  # 1: S, 2: I, 3:R
end

function model_initiation(;
    Ns,
    migration_rates,
    β_und,
    β_det,
    infection_period = 30,
    reinfection_probability = 0.05,
    detection_time = 14,
    death_rate = 0.02,
    Is = [zeros(Int, length(Ns) - 1)..., 1],
    seed = 0,
)

    rng = Xoshiro(seed)
    @assert length(Ns) ==
    length(Is) ==
    length(β_und) ==
    length(β_det) ==
    size(migration_rates, 1) "length of Ns, Is, and B, and number of rows/columns in migration_rates should be the same "
    @assert size(migration_rates, 1) == size(migration_rates, 2) "migration_rates rates should be a square matrix"

    C = length(Ns)
    # normalize migration_rates
    migration_rates_sum = sum(migration_rates, dims = 2)
    for c in 1:C
        migration_rates[c, :] ./= migration_rates_sum[c]
    end

    properties = @dict(
        Ns,
        Is,
        β_und,
        β_det,
        β_det,
        migration_rates,
        infection_period,
        infection_period,
        reinfection_probability,
        detection_time,
        C,
        death_rate,
    )
    space = GraphSpace(complete_graph(C))
    model = StandardABM(PoorSoul, space; agent_step!, properties, rng)

    # Add initial individuals
    for city in 1:C, n in 1:Ns[city]
        ind = add_agent!(city, model, 0, :S) # Susceptible
    end
    # add infected individuals
    for city in 1:C
        inds = ids_in_position(city, model)
        for n in 1:Is[city]
            agent = model[inds[n]]
            agent.status = :I # Infected
            agent.days_infected = 1
        end
    end
    return model
end

model_initiation (generic function with 1 method)

We will make a function that starts a model with C number of cities, and creates the other parameters automatically by attributing some random values to them. You could directly use the above constructor and specify all Ns, β, etc. for a given set of cities.

All cities are connected with each other, while it is more probable to travel from a city with small population into a city with large population.

using LinearAlgebra: diagind

function create_params(;
    C,
    max_travel_rate,
    infection_period = 30,
    reinfection_probability = 0.05,
    detection_time = 14,
    death_rate = 0.02,
    Is = [zeros(Int, C - 1)..., 1],
    seed = 19,
)

    Random.seed!(seed)
    Ns = rand(50:5000, C)
    β_und = rand(0.3:0.02:0.6, C)
    β_det = β_und ./ 10

    Random.seed!(seed)
    migration_rates = zeros(C, C)
    for c in 1:C
        for c2 in 1:C
            migration_rates[c, c2] = (Ns[c] + Ns[c2]) / Ns[c]
        end
    end
    maxM = maximum(migration_rates)
    migration_rates = (migration_rates .* max_travel_rate) ./ maxM
    migration_rates[diagind(migration_rates)] .= 1.0

    params = @dict(
        Ns,
        β_und,
        β_det,
        migration_rates,
        infection_period,
        reinfection_probability,
        detection_time,
        death_rate,
        Is
    )

    return params
end

create_params (generic function with 1 method)

SIR Stepping functions

Now we define the functions for modelling the virus spread in time

function agent_step!(agent, model)
    migrate!(agent, model)
    transmit!(agent, model)
    update!(agent, model)
    recover_or_die!(agent, model)
end

function migrate!(agent, model)
    pid = agent.pos
    m = sample(abmrng(model), 1:(model.C), Weights(model.migration_rates[pid, :]))
    if m ≠ pid
        move_agent!(agent, m, model)
    end
end

function transmit!(agent, model)
    agent.status == :S && return
    rate = if agent.days_infected < model.detection_time
        model.β_und[agent.pos]
    else
        model.β_det[agent.pos]
    end

    n = rate * abs(randn(abmrng(model)))
    n <= 0 && return

    for contactID in ids_in_position(agent, model)
        contact = model[contactID]
        if contact.status == :S ||
           (contact.status == :R && rand(abmrng(model)) ≤ model.reinfection_probability)
            contact.status = :I
            n -= 1
            n <= 0 && return
        end
    end
end

update!(agent, model) = agent.status == :I && (agent.days_infected += 1)

function recover_or_die!(agent, model)
    if agent.days_infected ≥ model.infection_period
        if rand(abmrng(model)) ≤ model.death_rate
            remove_agent!(agent, model)
        else
            agent.status = :R
            agent.days_infected = 0
        end
    end
end

params = create_params(C = 8, max_travel_rate = 0.01)
model = model_initiation(; params...)

StandardABM with 28540 agents of type PoorSoul
 agents container: Dict
 space: GraphSpace with 8 positions and 28 edges
 scheduler: fastest
 properties: Is, death_rate, infection_period, β_und, Ns, migration_rates, detection_time, reinfection_probability, β_det, C

Example animation

At the moment abmplot does not plot GraphSpaces, but we can still utilize the ABMObservable. We do not need to collect data here, only the current status of the model will be used in visualization

using CairoMakie
abmobs = ABMObservable(model)

ABMObservable with model:
StandardABM with 28540 agents of type PoorSoul
 agents container: Dict
 space: GraphSpace with 8 positions and 28 edges
 scheduler: fastest
 properties: Is, death_rate, infection_period, β_und, Ns, migration_rates, detection_time, reinfection_probability, β_det, C
and with data collection:
 adata: nothing
 mdata: nothing

We then initialize elements that are lifted observables from abmobs:

infected_fraction(m, x) = count(m[id].status == :I for id in x) / length(x)
infected_fractions(m) = [infected_fraction(m, ids_in_position(p, m)) for p in positions(m)]
fracs = lift(infected_fractions, abmobs.model)
color = lift(fs -> [cgrad(:inferno)[f] for f in fs], fracs)
title = lift(
    (m) -> "step = $(abmtime(m)), infected = $(round(Int, 100*infected_fraction(m, allids(m))))%",
    abmobs.model
)

Observable("step = 0, infected = 0%")

And lastly we use them to plot things in a figure

fig = Figure(size = (600, 400))
ax = Axis(fig[1, 1]; title, xlabel = "City", ylabel = "Population")
barplot!(ax, model.Ns; strokecolor = :black, strokewidth = 1, color)
fig

Now we can even make an animation of it

record(fig, "covid_evolution.mp4"; framerate = 5) do io
    for j in 1:30
        recordframe!(io)
        Agents.step!(abmobs, 1)
    end
    recordframe!(io)
end

"covid_evolution.mp4"

One can really see "explosive growth" in this animation. Things look quite calm for a while and then suddenly supermarkets have no toilet paper anymore!

Exponential growth

We now run the model and collect data. We define two useful functions for data collection:

infected(x) = count(i == :I for i in x)
recovered(x) = count(i == :R for i in x)

and then collect data

model = model_initiation(; params...)

to_collect = [(:status, f) for f in (infected, recovered, length)]
data, _ = run!(model, 100; adata = to_collect)
data[1:10, :]

We now plot how quantities evolved in time to show the exponential growth of the virus

N = sum(model.Ns) # Total initial population
fig = Figure(size = (600, 400))
ax = fig[1, 1] = Axis(fig, xlabel = "steps", ylabel = "log10(count)")
li = lines!(ax, data.time, log10.(data[:, dataname((:status, infected))]), color = :blue)
lr = lines!(ax, data.time, log10.(data[:, dataname((:status, recovered))]), color = :red)
dead = log10.(N .- data[:, dataname((:status, length))])
ld = lines!(ax, data.time, dead, color = :green)
Legend(fig[1, 2], [li, lr, ld], ["infected", "recovered", "dead"])
fig

The exponential growth is clearly visible since the logarithm of the number of infected increases linearly, until everyone is infected.